Cobra C-3510/20 Brushless Motor, Kv=1000
Cobra C-3510/20 Brushless Motor, Kv=1000
Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

The Cobra 3510 series motors have a 5mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The internal bearing measures 11mm x 5mm x 5mm and the outer bearing measures a massive 16mm x 5mm x 5mm! The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

Included with every Cobra 3510 Series Motor is a complete accessory package which contains the following items:

● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style threaded prop adapter with 3 screws
● Retaining Collar with Set Screw
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubing

Click here for the Cobra C-3510/20 Propeller Data Chart

Cobra 3510/20 Motor Specifications
 Stator Diameter 35.0 mm (1.378 in)
 Stator Thickness 10.0 mm (0.394 in)
 Number of Stator Slots 12
 Number of Magnet Poles 14
 Motor Wind 20 Turn Delta
 Motor Kv Value 1000 RPM per Volt
 No Load Current (Io) 1.06 Amps @ 14 Volts
 Motor Resistance (Rm) per Phase 0.060 Ohms
 Motor Resistance (Rm) Phase to Phase 0.040 Ohms
 Maximum Continuous Current 32 Amps
 Max Continuous Power (3-cell Li-Po) 350 Watts
 Max Continuous Power (4-cell Li-Po) 470 Watts
 Max Continuous Power (5-cell Li-Po) 590 Watts
 Motor Weight 141 grams (4.97 oz.)
 Outside Diameter 43.0 mm (1.693 in.)
 Shaft Diameter 5.00 mm (0.197 in.)
 Motor Body Length 36.0 mm (1.417 in.)
 Overall Shaft Length 58.0 mm (2.283 in.)
 Motor Timing 5-10 degrees
 PWM Frequency 8 KHz